Vacuum Tray Dryer

• Main Body/Vacuum chamber SS316 with heavy duty SS316 flange and Stiffeners.
• Door SS 316 (Dish Curve shape) with heavy duty SS316 flange.
• Shelves Hollow Type pads SS316 with flow Baffles.
• Condenser (Shell & tube type) and Receiver (Cylindrical/ Botom Cone type) in SS
• 304 with Isolation valve and Flow Glass in between to monitor condensation.
• Trays (without back folding) in SS316 rounded corners and edges.
• Explosion Vent / Rupture Disc on vacuum chamber.
• Digital Temperature Controller (FLP) with solenoid controlled Pneumatic operated
• valve at Hot Water inlet.
• Provision for Validation Port on Body
• Digital Temp., Indicator (FLP) at H.W. inlet & outlet.
• Dial type Vacuum gauge and Digital Temp., Indicator (FLP) in Vapour line.
• Pressure release valve in Steam line.

• View Glass/Light glass provided on vacuum chamber  Door, Body and Receiver.
• Silicon transparent gasket for door.
• Nitrogen purging valve provided on Vacuum chamber.
• Vacuum break valve provided on vacuum chamber
• Drain valve for Vacuum chamber and Receiver.

Optional :

• Condenser and Receiver in SS 316 instead of SS 304
• Insulation on the vacuum chamber outer surface except door. The insulation is enclosed and covered with removable SS 304 panels.
• Skirting /wall panel all along the body/vacuum chamber flange.
• Validation port with Censors.
• Hot water system (steam heated) with MS tank (Insulated), SS 304 steam radiator/electrical heaters, circulation pump with FLP Motors and controls.
• Vacuum Pump ( 2stage water ring) with FLP motor.